GROUP RIDING GUIDANCE

1. Riding close together [within 2-3 feet of the rider in front and besides]. It makes the group easier to pass, is more social and helps tired riders keep up.

If you’re not comfortable riding on the outside, ask the rider on the inside to let you in (they slow, you go in front of them, outside line moves up).  Getting comfortable riding tight together comes with practice.  Riding in 2 tight lines is the club’s default group riding structure.

2. Stay with your group, and make sure those behind can stay with you.

Be aware of the riders behind you, they should be close (see above).  Ease-up if the rider behind you is struggling.  When riding up slight climbs, aim for consistent effort not consistent speed.

It’s expected that the group will split on long climbs, so stop and regroup at the top (or shortly after).

3. Ride at the pace of the rider beside you, if he slows, you slow.

If you ride slightly in front of the rider besides [known as half wheeling], they will speed up.  Soon you’ll be riding at 40mph and the group will be all over the road.  If the rider besides is half wheeling you, tell them to ease-up.

4. Ride directly behind the rider in front and you’ll ensure everyone stays in a safe, tidy position.

Riding in the middle [of the 2 riders in front] causes the rider on your outside to be pushed wider into the road, makes the group harder to pass and puts that rider in the wind.

5. The gutter is full of stones, mud, and drain covers.  It’s also pretty close to the edge of the road and is rubbish for riding in.

If you ride in the gutter, you’re forcing everyone behind you to do the same.  Drain covers are slippery and often wide enough to get your wheel stuck in.  You should be riding to the right of drain covers, about 2 to 3 feet of the road edge.

6. Braking smoothly, turning smoothly and making it obvious what you’re doing will give other riders time to react and make the ride less stressful.

Braking hard is particularly dangerous.  The concertina effect means riders further back have even less time to react.  No-one wants to do the whole ride on high alert.  The smoother everyone is, the more relaxed everyone can be.

7. If there are 2 riders on the front [side by side], passing them will cause you be ride 3 abreast and risk the group splitting.

Controlling the pace of the ride is down to the riders on the front.  If you pass them, they can no longer control the pace.  If you want to ride on the front or come past, ask the rider in front.  It’s also rare that the roads are quiet or wide enough to make it safe to ride 3 abreast.

8. Ride at an inclusive pace when riding on the front and the group will stay together.

When you’re on the front, you are responsible for the pace of the group.  If you ride too fast, the group will split.  Be aware of who is in the group and their abilities.  Ride at a pace all can keep up with.

9. Pedal on downhills when riding on the front so everyone doesn’t run into the back of you.

Wind resistance is exponential, you’re going faster when going downhill so are hitting more wind than on the flats and far more than those behind.  When you’re on the front of the group, pedal on the downhills.  It will stop riders behind you from having to brake.

10.Overlapping your front wheel with the rear wheel of the rider in front could cause you to crash.

If the rider in front moves out, and your wheel is there, you’ll touch wheels.  When someone clips your front wheel you lose the ability to turn and balance.  It’s very likely you will come off, as will everyone behind you.

11.Ride leaders are there to keep the group together and safe.  Follow the ride leader’s instruction on directions, group structure, stopping places, warnings about dangerous roads and junctions, regroups and general riding.

If the ride leader tells you to slow down, ride tighter, watch your front wheel, keep in, move out, go forward… please listen.

12.A driver’s ability, vision, reactions and even car performance affect when it’s safe to pass.  Leave them to judge.

You might think it’s safe to pass, but you don’t know the driver or their vehicle.  Waving them past will influence their decision.  You don’t want a nervous driver pulling into the group half way through passing, or a driver with less than brilliant vision clipping a rider.

13.Lining out sometimes makes sense, but leave it to the ride leader to decide to avoid confusion.

Lining out can often cause the group to split, it’s scary for less experienced riders and often does not make it easier for a car to pass.  If everyone is shouting conflicting directions, it gets very confusing.  Check with the ride leader before shouting.

14.”Car back” is probably the most unhelpful call in any group ride. No-one knows what they are supposed to do in response.

There are often cars behind; They usually pass safely and without incident.  Shouting “car back” can cause panic.  Riders may take it to mean they should line out, slow down or move over.  You’re better to shout “keep it tight” or “Dave… move in”; It’s far more clear.

15.Pointing out potholes, gravel, branches, dead pheasants and other obstacles help keep the ride free from punctures, lost water bottles broken wheels and crashes.

Common calls are “Gravel”, “Hole”, “Middle” or anything really.  Try to make it clear what you mean and point to where it is.  When riding tight together, you’re unlikely to see a dead pheasant in the road, especially at night.  These gestures and shouts will make sure you avoid it.

16.Regroup in a safe place.  Groups of riders gathering by a junction makes it difficult for cars to see and navigate the junction.

Since you’re stopping anyway, it’s tempting to regroup at the junction.  If several riders are stopped, a car [or worse, a lorry] must approach the junction on the wrong size of the road.  They may then have to turn left across the group [very dangerous with a long vehicle].  Best to stop just after the junction, ideally at a layby or where the road is wider.

17.Modern bike lights cast strong shadows and can dazzle riders close behind. Dim them when riding in the group.

For a rear light, a low, constant setting is far better for the vision and comfort of those behind. For your front light, use a low setting when not riding on the front and you’ll avoid casting shadows of the riders in front affecting their vision.

18.No-one likes a face full of cow poo. Run mudguards with a mudflap in the winter.

Roads in the Dales are mucky in the winter. Tractors drag half the field onto the roads, the roads are gritted and often wet. Riding behind someone without mudguards in wet is horrible. You’re picking bits of grit out of your eyes for days and you’ll never get that white SCC jersey white again. A lot of mudguards don’t come low enough, you need a mudflap too.

19.Winter takes it’s toll on bikes. Check your gears, rims, brakes and tyres before every ride.

Salt rusts bolts and cables, seizing brakes and gears. Grit wears away brake pads and wears through rims. Wash, check and maintain your bike throughout the winter and you will spend less time standing around in the rain trying to fix your bike or waiting for others to fix theirs.

Stuart at Riders Cycle Centre runs maintenance courses and can give advice on cleaning and maintaining your bike.